OEM Toyota Certified Equipment
Meets Toyota OEM specifications and approval standards.
Gyspot PTI-S7
-
The Gyspot-PTI-s7-220v-Evolution is the ideal answer to the welding requirements of high strength steels (UHSS/boron), with a clamping force of 550daN, with 8bars air pressure, and a welding current that can reach 14 500Amps
Its C-clamp integrates a high-tech transformer
Brings a solution to limited power supply issues, as it can operate with 16 Amps to 25 Amps fuses only
Operation is extremely easy thanks to the automatic welding parameters setting in easy mode
GYSPOT 39.02
-
230V, 3800A steel dent remover ideal for all steel straightening and dent removal work. Easy to use thanks to its self-priming gun and intuitive control panel.
Only 2 parameters to select:
• power level (from 11 levels)
• the tool used (from 7 tools)
=> No need to set time and intensity.
Automatic priming system
The welding point is generated automatically by simple contact between the tool and the part to be straightened.
GYSPOT PRO 230
-
This 230 V, steel dent puller boasts an output current of 3,800 A making it ideal for all steel straightening
and dent-pulling applications. Its two guns (one automatic and one featuring trigger control) as well as its
user-friendly control panel automatic makes this device versatile and efficient to use.
GYSPOT Expert 200
-
Dedicated to the bodybuilder's various dent removal and straightening operations, the GYSPOT EXPERT 200 is a top-of-the-range device with a power rating of up to 5,100 A. Independent adjustment of welding current and time enables precise control of the impact of the weld on zinc-coated sheet metal, particularly thin sheet metal.
The GYSPOT EXPERT is designed for a 200-240 V, 30 A delayed fuse power supply and offers two operating modes:
- A MANUAL operating mode allowing the welding current and time to be adjusted independently to suit the bodybuilder's exact requirements.
- A SYNERGIC mode recommending settings based on GYS expertise.
For ease of use, it also offers two ignition systems:
- automatic priming: by simple contact between the tool and the part to be straightened.
- manual priming: by pressing a trigger when the tool is in contact with the workpiece.
EASYCUT 30 FV (WITH TORCH)
-
EASYCUT 30 FV is a 30 A plasma cutter with a cutting capacity of 10 mm in steel (and 15 mm in separation). Its HF-free ignition system extends the life of consumables. Designed for maintenance work, such as car bodywork, it features very robust mechanics and a simple interface with flowmeter.
- Quick and easy to fit consumables
- Intuitive control panel with a single potentiometer for adjusting cutting intensity
- HF-free priming to avoid electromagnetic interference
- Manual air pressure adjustment (2.5 < 9 bar) with front-mounted flowmeter.
- Automatic torch detection
- Supplied with IPT40 torch (4 m) and earth clamp (2 m, 10 mm²)
- Single-phase power supply, with flexible voltage, between 85 and 265 V
→ Requires connection to a compressed air source
GYSDUCTION AUTO COMPLETE (Generator+3 inductors)
-
GYSDUCTION AUTO is a powerful, instantaneous induction heating system. Ideal for bodywork, mechanics and maintenance:
- Removing all adhesives, logos, trim and mouldings
- Removing glued windows while preserving the trim (rear window, quarter panel, panoramic roof, etc.)
- Remove gravel guards and seals
- Free and unblock mechanical parts (bolts, screws, spark plugs, injectors, etc.)
- Remove minor dents from the bodywork without touching up the paintwork
COMPLETE AUTO GYSDUCTION Pack :
• AUTO GYSDUCTION
• 3 cables
• 1 window inductor
• 1 adhesive inductor
• 1 release inducer
• 1 pedal
SPEEDLINER EXPERT 200 + ARCPULL 200
SPEEDLINER PRO 230 + ARCPULL 200
MAG WIRE REEL STEEL Ø0.8 - PLASTIC REEL S200 5kg - ER70S-3 / G2Si1