OEM Nissan Certified Equipment
Meets Nissan OEM specifications and approval standards.
GYSPOT PRO 230
-
This 230 V, steel dent puller boasts an output current of 3,800 A making it ideal for all steel straightening
and dent-pulling applications. Its two guns (one automatic and one featuring trigger control) as well as its
user-friendly control panel automatic makes this device versatile and efficient to use.
GYSPOT Expert 200
-
Dedicated for various dent pulling and straightening body shop operations, the GYSPOT EXPERT 200 is a high spec machine able to deliver up to 5100A of power. The welding current and welding duration are set separately for a more accurate control of the impact to galvanize and particularly thin steel sheet.
GYSPOT 39.02
-
230V, 3800A steel dent remover ideal for all steel straightening and dent removal work. Easy to use thanks to its self-priming gun and intuitive control panel.
Only 2 parameters to select:
• power level (from 11 levels)
• the tool used (from 7 tools)
=> No need to set time and intensity.
Automatic priming system
The welding point is generated automatically by simple contact between the tool and the part to be straightened.
Solidus ADP-200-3 Pulse Mig
-
The Solidus 3-Gun Pulse Mig Welder is a single-phase, 200 Amp, multi-function inverter generator for Mig Pulse, Mig Double Pulse, MIG-MAG, Stick and TIG Welding.
This dynamic MiG welder has been featured by I-CAR at SEMA for 2 years and is gaining a national reputation for is easy-to-use interface and high-quality welding features. It is portable, reliable and efficient.
The system comes with in-shop training and service.
Solidus 3-Gun Pulse Mig Welder features :
Versatile 3 torch system; can be set up with steel, silicone bronze, aluminum, or any combination
Lightweight and portable with 2 gas tank positions
Easy weld setup and programming with single button selectable options
Single or double-pulse operation
Double roller drives for accurate and consistent wire feed
TIG and stick welding capability
Designed and built for the collision repair expert in mind
Solidus ADP-300-3 Pulse Mig
-
The Solidus ADP-300-3 is our 3phase version of the ADP-200-3. another 3-Gun Pulse Mig Welder is a three-phase, 200 Amp, multi-function inverter generator for Mig Pulse, Mig Double Pulse, MIG-MAG, Stick and TIG Welding.
This dynamic MiG welder has been featured by I-CAR at SEMA for 2 years and is gaining a national reputation for is easy-to-use interface and high-quality welding features. It is portable, reliable and efficient.
The system comes with in-shop training and service.
Solidus 3-Gun Pulse Mig Welder features :
Versatile 3 torch system; can be set up with steel, silicone bronze, aluminum, or any combination
Lightweight and portable with 2 gas tank positions
Easy weld setup and programming with single button selectable options
Single or double-pulse operation
Double roller drives for accurate and consistent wire feed
TIG and stick welding capability
Designed and built for the collision repair expert in mind
Solidus ADP-200-4 Quad torch MIG Welder
-
The 200 Quad is single-phase, 200 AMP, 4-Gun MIG welder, and a multi-function inverter generator for MIG pulse, MIG double pulse, MIG-MAG, stick, and TIG welding.
This versatile 4 torch system can be set up with Steel, Silicon Bronze, Aluminum, or any combination.
Allsweld ADP-200-1
-
A compact, single-phase, synergic, multi-process inverter generator for MIG / MAG, MMA, TIG “Lift”
Pulse and double-pulse welding
Characterized by cutting edge, attractive design with next generation inverter technology
Allsweld ADP 180-1
-
ADP-180-1 Multi-Function Inverter Generator
For Single-Phase Power Supplies for MIG-MAG, MMA, and TIG Welding (with “Lift” type ignition)
The ADP-180-1 is a highly versatile, lightweight, and portable inverter generator designed for premium welding performance across multiple applications. Powered by advanced IGBT inverter technology, this digitally controlled unit delivers high-quality welds for materials such as stainless steel, aluminum, and galvanized steel. The spatter-free technology ensures reduced reprocessing and exceptional results in TIG and MMA welding operations.
Allsweld ADP-270-1 Single Gun
-
A single-gun multi-function inverter generator MIG welder for auto body repair.
Characterized by cutting edge, attractive design combined with the latest generation inverter technology and digital welding control
Versatile 1 torch system can be set up with Steel, Silicone Bronze, or Aluminum
Splatter-free welding feature minimizes reprocessing work and ensures excellent performance.
Visor protected control panel
High electrical performance reduces energy consumption
Equipped with the VISION-ARC software to satisfy synergy with complete control of all welding parameters
MW1 Synergic Welder
-
Excellent welding performance on any metal and thin laminate sheet
QBS Feeding Motor: Quick Brake System for constant and repeated arc striking
Quick connection for the ground cable
Metallic main structure with shock-proof fibre compound front frames
Control panel protected against impact
Large ergonomic handle for easy maneuverability
Sloping front control panel, easy to read, adjust, and visible from any direction
Standard version supplied with cylinder carriage and robust wheels
Eye-bolts on top for easy lifting
MLT-55 Lift
-
The ALL NEW MOBILE LIFT is a portable full-rise X-lift table that is perfect for EV battery pack replacement. This space-saving scissor lift is ideal for handling EV batteries effectively because of its small size and mobility throughout the workshop. To elevate, lower, and move objects like a high voltage electric vehicle (EV) battery, an engine, a transmission, a fuel tank, or an axle.
MS-12 Mobile Lifting Table
-
Solidus MS-12 3000 lbs. Mobile Lifting Table is designed for dismantling and fixing battery packs of electric vehicles, engines, gearboxes, drive axles, fuel tanks, suspensions, and more. It is compact with a long-lasting wireless 12V DC power system
MS-10 Mobile Lifting Table
-
Solidus MS-10 Mobile Lifting Table is designed for dismantling and fixing battery packs of electric vehicles, as well as engines, gearboxes, drive axles, fuel tanks, suspensions, brackets, and chassis components of traditional vehicles.
MLT-3 Multi-Use Lift
-
The Solidus MLT-3 Multi-Use Table and mobile lifting cart is designed to assist in the installation and removal of electric vehicle batteries and other vehicle components. It is also very useful for holding and installing engines, gearboxes, drive axles, fuel tanks, suspensions and chassis components of traditional vehicles, all while moving it conveniently around the shop.
The table top is expandable, rotatable and adjustable. It also holds adjustable fixtures for holding and securing vehicle components.
MLT-3 Multi-Use Table Features
The mobile and compact structure makes it easy to enter and exit service space.
It is hydraulically driven with mechanical locking protection.
The suspension platform can move freely within a radius of 30mm, while the lower platform can move within a radius of 20mm to satisfy multiple positions.
The table is rotatable and adjustable using the remote control.
Positioning and fixing components with specialized fixtures.
Sevenne XL
-
Extra-long mobile bench on wheels
Specially designed for repairing larger commercial vehicles
Allows positioning under a 2-post lift, and for loading and easily moving between work bays
5.8 m (19 ft) length is suitable for light trucks and commercial vehicles
The universal peripheral frame enables quick anchoring; adjustment of the clamps, wheels, transport handle; and multi-function supports
Rhone 4.2T
-
Drive-on bench with scissor lift
Rhone drive-on bench has been upgraded with a lifting capacity of 4200 kg and 1.32 m height. The most versatile bench facilitates quick diagnosis and straightening with MZ/MZ+ and Cameleon universal bracket sets, pre and post repair reports can be obtained with Celette measuring systems. Thanks to the Celette vehicle loading trolley which enable you to load the damaged vehicles.
Rhone XL
-
5.8 m (19 ft) extra-long drive-on bench with double scissor lift
4200 kg (9260 lb) lifting capacity to repair all types of light commercial vehicles and long wheel base passenger cars
Lifting height of 1.3 m (51 in.) enables you to work at a very comfortable height for better productivity
Sevenne
-
Complete mobile bench on wheels
Sevenne is a universal mobile bench, which can be upgraded to Rhone or Griffon. The anchoring can be achieved all around the bench, thanks to its peripheral frame for quick fiing of wheels, clamps; multi-function supports; and a steering handle.
Smart Rhone
-
The most unique feature of SMART RHONE is “QUICK ANCHORING” the vehicle can be anchored and ready to perform pulling operation in less than 15 MINUTES.
Compatible with 3D electronic measuring system NAJA 3D & EAGLE 3D.
SMART RHONE is first of its kind which can also accommodate dedicated jig (MZ+ system) & Universal adaptive jig system Cameleon.
SMART RHONE offers the extreme flexible repair solution to the technician and enhance body-shop productivity.
With 3500 KG lifting capacity along with 1300 mm lifting height the SMART RHONE is versatile to all kind of vehicle in its segment.
Rhone L 4.2T
-
5 m (16.4 ft) long drive-on bench with scissor lift facilitates quick loading
Rhone L is the longer version of Rhone drive-on bench with 5 m long and enhanced lifting capacity of 4200 kg (9260 lb)
Maximum lifting height is 1.36 m (4.25 ft)
Recommended for long wheel base vehicle
Detachable rams provide better access to the vehicle while pulling and measuring
Griffon XL
-
Extra-long bench with twin lifting system
5.8 m (19 ft) long bench specially designed for repairing commercial vehicles and SUVs
This length enables you to complete simultaneous repairs at both the front and rear of the vehicle
Supplied with 2 independent inner lifting units and a hydraulic tilting system
SPEEDLINER V2 PRO 230 + ARCPULL 200
SPEEDLINER EXPERT 200 + ARCPULL 200